sophos utm Automating Pingdom Probes IP-Whitelisting with Probecollector Introduction It was hard to find a good title for this blog post, so let me explain it a bit further. You may have API's or applications that are secured
Hetzner Proxmox 5 on Hetzner Root-Server with Dual-Stack IPv4/IPv6 for Host and Guests Introduction In an earlier blog post i wrote about a standard Debian installation with KVM, IPv4 and IPv6 for both the host and it's guests. This time we will setup Proxmox 5.x on a Hetzner Root-Server also using Debian and IPv4 and IPv6
sophos utm Configuring IPv6 with Sophos UTM 9 and KabelDeutschland With almost every private customer contract from KabelDeutschland (KD) you'll get DS-Lite with a Carrier-grade IPv4 NAT and an IPv6 Prefix routed to your very own IPv6 Gateway - in most cases this is just your cable modem or router. I'am using a Sophos
debian Hetzner Root-Server with Debian/KVM IPv4 and IPv6 Networking Introduction Since the IPv4 address space is almost completely used up, the future protocol is IPv6 which has been around for lots of years already and it is highly recommended to at least enable it for your machines and use it in dual-stack mode